NEW! Centroid Acorn CNC Basics - Video Series

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: NEW! Centroid Acorn CNC Basics - Video Series

Post by martyscncgarage »

7 Acorn Basics - Using the Wizard and Tuning the Bench Test Rig
https://youtu.be/F3SSgb_FnDA


Attached is the Overall ratio calculator for doing the math when you are ready to fine tune.
It is an .xls file. Google sheets will open it.
Overall Turns Ratio Calculator 171112.xls
Overall Turns ratio calculator spreadsheet for fine tuning.
(17.62 KiB) Downloaded 508 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: NEW! Centroid Acorn CNC Basics - Video Series

Post by martyscncgarage »

Wiring up a closed loop stepper to Acorn.
Made for Automation Technologies by Leadshine.

https://youtu.be/FQG0R1g-QRo
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Locked