Techno Isel Lathe-throwing my hat in the ring
Moderator: cnckeith
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Techno Isel Lathe-throwing my hat in the ring
You have a nice machine. Many of us are putting our City and State in our Signature line so we know who is where.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 13
- Joined: Wed Oct 25, 2017 6:19 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Springfield, Illinois
Re: Techno Isel Lathe-throwing my hat in the ring
I located the pic the other gentleman took of his servo with the end cover removed. I'm afraid I wasn't able to get any further into the tear down last night. I will carry on as soon as I can.
Springfield, Illinois
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Techno Isel Lathe-throwing my hat in the ring
This is a video on the setup of the Geckodrive G320X Servo motor driver that I suggested you consider:
https://youtu.be/0k3cR2d8dsM
Marty
https://youtu.be/0k3cR2d8dsM
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ