Acorn won't run g code/mdi < lathe G98/G99?>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
pescadoman
Posts: 113
Joined: Wed Feb 12, 2020 3:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: USA

Re: Acorn won't run g code/mdi

Post by pescadoman »

cnckeith wrote: ↑Tue Apr 23, 2024 6:12 pm probably trying to command a G1 with an encoder installed
read up on G98 and G99 in the operator manual

but who knows i left my crystal ball at home. :-)
I'm sorry for being such a dummy... :-{. I sincerely appreciate all the help. Yes, I have the Centroid encoder installed
So instead of
G01 x0y0 f15, like with a mill
it would be
g98
g01 x0y0 f15, giving the feedrate in inches per minute...
g98 sets the parameter for the rest of the program...
Top
Post Reply

Return to “Centroid Acorn CNC Controller”