If you have your machine up and runnning but for some reason you need to uninstall the software and start from scratch. Here are a couple of tips.
First, do a report, save it in a couple of places. I like to use a USB drive to put a copy there as well as the default directory that CNC12 uses. The Report file contains your machine configuration settings and could be opened for reference. Check this Quickie Tip on saving (and restoring) a report: viewtopic.php?f=60&t=943
Easier yet, open the Wizard and use your camera phone or digital camera to take pictures of each of the pages! That way when you uninstall, and reload CNC12, you can look at the pictures and copy back the settings into the new version of the Wizard. Be sure to double check them.
Marty
Quickie Tip: Have to reinstall CNC12 software? Take pictures!
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Quickie Tip: Have to reinstall CNC12 software? Take pictures!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ