Hi.
The problem is solved.
Turkish encoder thrown in the trash. I put a servo motor on the spindle drive RS automation CSD5-15BX1+RSMD-15BR1ASK3 1.5kW.
That was a good idea. Now the spindle has stable revolutions and excellent power.
Thanks to everyone who took part in solving my problem.
Problem with threading
Moderator: cnckeith
-
- Posts: 16
- Joined: Sat Sep 07, 2019 9:17 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Problem with threading
So now the machine cuts the thread.
https://www.youtube.com/watch?v=IwjCLWRbQXI
https://www.youtube.com/watch?v=IwjCLWRbQXI
-
- Posts: 536
- Joined: Sat Jul 08, 2017 7:38 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: n/a yet
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Collierville, TN USA
Re: Problem with threading
Yeay! Somebody finally posted cutting fairly large threads in steel.
Milton in Collierville, TN
"Accuracy is the sum total of your compensating mistakes."
"Accuracy is the sum total of your compensating mistakes."
-
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: Problem with threading
What size would you like to see? lolDICKEYBIRD wrote: ↑Mon Mar 02, 2020 4:46 pm Yeay! Somebody finally posted cutting fairly large threads in steel.
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
-
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: Problem with threading
Well done sir!avangard wrote: ↑Mon Mar 02, 2020 4:25 pm So now the machine cuts the thread.
https://www.youtube.com/watch?v=IwjCLWRbQXI
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/