Bridgeport R2E4 W/DMM DYN4 Servos not reversing
Moderator: cnckeith
-
- Posts: 7
- Joined: Sat Oct 20, 2018 7:29 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C8FD19F2215B-0404180798
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Bridgeport R2E4 W/DMM DYN4 Servos not reversing
Ok, thanks. I will reach out to DMM for better understanding why the recommendation to deviate from your schematic. And why others are able to get by with 5v supplied to pin 11 and 22.
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Bridgeport R2E4 W/DMM DYN4 Servos not reversing
We tested the DYN4 to Acorn cable made by DMM today. It works. Please see schematic attached.
Set Gear number to 2000 in DMM software
and use 8000 steps per rev in the Acorn Wizard
follow previous software setting instructions with these differences..Set Gear number to 2000 in DMM software
and use 8000 steps per rev in the Acorn Wizard
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Bridgeport R2E4 W/DMM DYN4 Servos not reversing
will this work with rev. 2 board?
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Bridgeport R2E4 W/DMM DYN4 Servos not reversing
Yes should be no issue.
I tested the cable yesterday myself and did a video on it.
https://youtu.be/TMxjRL7YXXw
Be sure you have DYN4 configured and tested using the DMMDRV software first
I tested the cable yesterday myself and did a video on it.
https://youtu.be/TMxjRL7YXXw
Be sure you have DYN4 configured and tested using the DMMDRV software first
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Bridgeport R2E4 W/DMM DYN4 Servos not reversing
great video marty!
i made up a pdf as a reference to go with the video.
i made up a pdf as a reference to go with the video.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html