Tool Touch off selection has been added to the v4.12 Wizard i/o drop down list. Use the Wizard to set up the Tool Touch Off and probe inputs.
How to connect a TouchProbe and a ToolSetter at the same time
Moderator: cnckeith
-
- Posts: 7502
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: How to connect a TouchProbe and a ToolSetter at the same time
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Re: How to connect a TouchProbe and a ToolSetter at the same time
Please post a current report from 4.12
If you have it handy, a report from 4.10 might be helpful as well
If you have it handy, a report from 4.10 might be helpful as well
-
- Posts: 732
- Joined: Mon Feb 19, 2018 2:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269594F9C-0110180512
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
- Contact:
Re: How to connect a TouchProbe and a ToolSetter at the same time
Here are the reports for 4.10 and 4.12.
Both probes work with both versions using the parameter settings therein.
Both probes work with both versions using the parameter settings therein.
- Attachments
-
- report_38D269594F9C-0110180512_2018-05-14_20-42-30.zip
- (183.45 KiB) Downloaded 147 times
-
- report_38D269594F9C-0110180512_2018-05-12_20-21-17.zip
- (250.87 KiB) Downloaded 124 times
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: How to connect a TouchProbe and a ToolSetter at the same time
This weekend I will also update to V4.12 and post the results of setting-up the probe and toolsetter.
-
- Posts: 415
- Joined: Thu Feb 08, 2018 7:57 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: How to connect a TouchProbe and a ToolSetter at the same time
Can the logic being discussed here be used for a lathe tool 'height' adjustment?