My first cut

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
RGSparber
Posts: 150
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D269533454-0111180523
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Phoenix, AZ
Contact:

My first cut

Post by RGSparber »

Thanks to a lot of help from this forum, I was able to make my first cut using Centroid Acorn on my 4 axis RF-30 Mill/Drill:

https://youtu.be/gAalEkMSsoY

Thanks to all,

Rick
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: My first cut

Post by martyscncgarage »

That's awesome Rick! Using Acorn full tilt, all 4 axis. Right on:!:
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply