Fadal VMC15XT
Moderator: cnckeith
-
- Posts: 53
- Joined: Mon May 06, 2013 5:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 6200 on the All In One and 1814 on the Acorn
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
-
- Posts: 53
- Joined: Mon May 06, 2013 5:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 6200 on the All In One and 1814 on the Acorn
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
Here is a youtube video of it drilling a hole then thread milling it to accept a 3/8 - 16 bolt. This was my first test on the machine.
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
Very Nice! I like how you managed to re-use the old console with an Allin1pc. Are you running it fully touchscreen?
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 53
- Joined: Mon May 06, 2013 5:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 6200 on the All In One and 1814 on the Acorn
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
Its partial touch screen and partial keybord and jog panel right now. I am working on getting more of the original jog panel hooked up right now. It would be nice if the centroid on screen jog panel could be dragged down below the dro and worked with the touchscreen.
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
Thanks for the suggestion. I will see if the on-screen virtual jog panel can be further improved in the future.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 53
- Joined: Mon May 06, 2013 5:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 6200 on the All In One and 1814 on the Acorn
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
Thank you ! That would be Great !
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Fadal VMC15XT
Dennis, did we lose the video link?dbensavage wrote: ↑Mon Mar 23, 2015 4:46 pm Here is a youtube video of it drilling a hole then thread milling it to accept a 3/8 - 16 bolt. This was my first test on the machine.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 53
- Joined: Mon May 06, 2013 5:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 6200 on the All In One and 1814 on the Acorn
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Fadal VMC15XT
It's no longer on Youtube and I can't find it on my computer ??? Not sure what happened ![Confused :?](./images/smilies/icon_e_confused.gif)
![Confused :?](./images/smilies/icon_e_confused.gif)