100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith »

100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX
Terry just posted these images on his facebook page (Arrow Controls), pretty impressive lathe and CNC control system upgrade..nice work!

"Leblond lathe with a 100HP spindle motor, Yaskawa Sigma5 servo motors and drives and a Centroid 400 Oak system. Making chips today."
Attachments
ARROW_LEBLOND (4).jpg
ARROW_LEBLOND (5).jpg
ARROW_LEBLOND (3).jpg
ARROW_LEBLOND (6).jpg
ARROW_LEBLOND (1).jpg
ARROW_LEBLOND (2).jpg
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: 100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith »

and Terry posted this video:
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: 100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith »

24297130_1515663528469413_2707438356929816750_o.jpg
24297224_1515663675136065_8855536786362637803_o.jpg
24273650_1515663598469406_7348917322273007754_o.jpg
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply