100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 515
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith » Thu Nov 30, 2017 4:40 pm

100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX
Terry just posted these images on his facebook page (Arrow Controls), pretty impressive lathe and CNC control system upgrade..nice work!

"Leblond lathe with a 100HP spindle motor, Yaskawa Sigma5 servo motors and drives and a Centroid 400 Oak system. Making chips today."
Attachments
ARROW_LEBLOND (4).jpg
ARROW_LEBLOND (5).jpg
ARROW_LEBLOND (3).jpg
ARROW_LEBLOND (6).jpg
ARROW_LEBLOND (1).jpg
ARROW_LEBLOND (2).jpg

cnckeith
Posts: 515
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: 100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith » Sun Dec 03, 2017 7:52 pm


cnckeith
Posts: 515
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: 100 HP LeBlond Lathe with Centroid T400, Arrow Controls Houston, TX

Post by cnckeith » Sun Dec 03, 2017 8:23 pm

24297130_1515663528469413_2707438356929816750_o.jpg
24297224_1515663675136065_8855536786362637803_o.jpg
24273650_1515663598469406_7348917322273007754_o.jpg

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest