First cut on plasma machine using acorn

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Extreme Industrial
Posts: 1
Joined: Sat Dec 30, 2017 5:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

First cut on plasma machine using acorn

Post by Extreme Industrial » Sat Dec 30, 2017 5:24 pm

This is the first cut on this machine using the acorn board. It needs some tweaking, but turned out great for the first cut. I will post more photos and videos soon.
536360329.jpg

frijoli
Posts: 342
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none yet
Location: Outside Winston-Salem, NC

Re: First cut on plasma machine using acorn

Post by frijoli » Sun Dec 31, 2017 10:32 pm

Extreme Industrial wrote:
Sat Dec 30, 2017 5:24 pm
I will post more photos and videos soon.536360329.jpg
How soon?? :D
Outside Winston-Salem, NC

martyscncgarage
Posts: 722
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: First cut on plasma machine using acorn

Post by martyscncgarage » Mon Jan 01, 2018 7:02 pm

Extreme Industrial wrote:
Sat Dec 30, 2017 5:24 pm
This is the first cut on this machine using the acorn board. It needs some tweaking, but turned out great for the first cut. I will post more photos and videos soon.536360329.jpg
Nice. Would like to see more pictures and details of your machine. Which THC did you use, what motors did you use etc.....
Video of it CUTTING would be nice!
Marty
"Jack of all trades, master of none!"
Mesa, AZ

bloomingtonmike
Posts: 91
Joined: Wed Sep 11, 2013 1:31 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 0916130849

Re: First cut on plasma machine using acorn

Post by bloomingtonmike » Tue Jan 02, 2018 4:58 pm

Yes, Also interested in your THC solution.
Mikie in Bloomington IL

frijoli
Posts: 342
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none yet
Location: Outside Winston-Salem, NC

Re: First cut on plasma machine using acorn

Post by frijoli » Mon Jan 15, 2018 9:29 pm

Bueller
Outside Winston-Salem, NC

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest