Page 1 of 1

Anamet Anaconda MTC Conduit - [SOLVED]

Posted: Sun Sep 03, 2017 3:25 pm
by tblough
I really like the flexibility of the Anamet MTC conduit Centroid uses on their kits but I have not been able to locate anyplace that sells it in less than 100' rolls. Has anyone else seen this anywhere you can buy it by the foot? Centroid - do you sell this to the DIY community?

Thanks,

Tom

Re: Anamet Anaconda MTC Conduit

Posted: Tue Sep 05, 2017 9:05 am
by Centroid_Liviu
Are you looking for just the conduit or the conduit with end connectors? Our standard console extension 6' conduit (no cables inside) with end connectors is $115.

Re: Anamet Anaconda MTC Conduit

Posted: Tue Sep 05, 2017 10:55 am
by martyscncgarage
Not exactly the same, but very flexibie:
https://www.mcmaster.com/#standard-elec ... t/=1992y67

Re: Anamet Anaconda MTC Conduit

Posted: Sat Sep 09, 2017 8:22 pm
by tblough
Thanks, Liviu and Marty. I was looking for 3/4" Anaconda not the 1.25" console extension and I did find a place that will sell by the foot. West Side Electric Supplyin South Elgin, Illinois has all the sizes sells cut lengths. For anyone who is building a CNC machine, Anamet Anaconda M.T.C. conduit is the most flexible metallic conduit I have ever found. It is even more flexible than most non-metallic conduit (even more flexible that McMaster's flex-rated non-metallic offering, Marty) and being made for machine tools is oil-resistant.

Here's the manufacturer's web page on the product - http://flexiblewiringconduits.anacondas ... nduit-lfmc

Cheers,

Tom