Anamet Anaconda MTC Conduit - [SOLVED]

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
tblough
Posts: 44
Joined: Tue Mar 22, 2016 10:03 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Anamet Anaconda MTC Conduit - [SOLVED]

Post by tblough » Sun Sep 03, 2017 3:25 pm

I really like the flexibility of the Anamet MTC conduit Centroid uses on their kits but I have not been able to locate anyplace that sells it in less than 100' rolls. Has anyone else seen this anywhere you can buy it by the foot? Centroid - do you sell this to the DIY community?

Thanks,

Tom
Last edited by tblough on Sat Sep 09, 2017 8:22 pm, edited 1 time in total.

Centroid_Liviu
Posts: 259
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Anamet Anaconda MTC Conduit

Post by Centroid_Liviu » Tue Sep 05, 2017 9:05 am

Are you looking for just the conduit or the conduit with end connectors? Our standard console extension 6' conduit (no cables inside) with end connectors is $115.

martyscncgarage
Posts: 384
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Anamet Anaconda MTC Conduit

Post by martyscncgarage » Tue Sep 05, 2017 10:55 am

Not exactly the same, but very flexibie:
https://www.mcmaster.com/#standard-elec ... t/=1992y67
"Jack of all trades, master of none!"
Mesa, AZ

tblough
Posts: 44
Joined: Tue Mar 22, 2016 10:03 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Re: Anamet Anaconda MTC Conduit

Post by tblough » Sat Sep 09, 2017 8:22 pm

Thanks, Liviu and Marty. I was looking for 3/4" Anaconda not the 1.25" console extension and I did find a place that will sell by the foot. West Side Electric Supplyin South Elgin, Illinois has all the sizes sells cut lengths. For anyone who is building a CNC machine, Anamet Anaconda M.T.C. conduit is the most flexible metallic conduit I have ever found. It is even more flexible than most non-metallic conduit (even more flexible that McMaster's flex-rated non-metallic offering, Marty) and being made for machine tools is oil-resistant.

Here's the manufacturer's web page on the product - http://flexiblewiringconduits.anacondas ... nduit-lfmc

Cheers,

Tom

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests