Computer Optimization
Posted: Mon Aug 28, 2017 1:18 pm
If you are running only the Centroid software on your controller PC (as recommended) there are some further optimizations you can do to the PC beyond the Windows 10/Centroid Configuration video. The Windows operating system runs a lot of additional programs called Services in the background. These programs support things like cryptography, networking, messaging and other features. To see what services are running in the background on your machine, click the start icon, type services, and then click on the "Services, Desktop App" icon. Up will pop the services dialog - any service listed as running is currently taking up processor cycles.
If the only software you are running is CNC11/12 then most of the services are not needed and can be turned off. Which ones you ask? Well, the gaming community has already done the legwork for us. They are also concerned with maximizing the hardware performance and have determined which services can be safely turned off.
The best guide to turning off services is from Black Viper (try to ignore the gamer handles - it's a different mindset but don't discount their technical abilities). He's put together a comprehensive list of what the services do and what you actually need on his website http://www.blackviper.com/service-confi ... gurations/. To make things even easier Madbomb122 has put together a Windows PowerShell script to make the changes automatically - https://github.com/madbomb122/BlackViperScript.
I've been running the Tweaked/Minimal configuration on my mill and lathe (CNC11/Allin1DC, CNC11/MPU11) both running Windows10 home for the last 3 months without a single complaint. Of course, your mileage may vary.
Cheers,
Tom
If the only software you are running is CNC11/12 then most of the services are not needed and can be turned off. Which ones you ask? Well, the gaming community has already done the legwork for us. They are also concerned with maximizing the hardware performance and have determined which services can be safely turned off.
The best guide to turning off services is from Black Viper (try to ignore the gamer handles - it's a different mindset but don't discount their technical abilities). He's put together a comprehensive list of what the services do and what you actually need on his website http://www.blackviper.com/service-confi ... gurations/. To make things even easier Madbomb122 has put together a Windows PowerShell script to make the changes automatically - https://github.com/madbomb122/BlackViperScript.
I've been running the Tweaked/Minimal configuration on my mill and lathe (CNC11/Allin1DC, CNC11/MPU11) both running Windows10 home for the last 3 months without a single complaint. Of course, your mileage may vary.
Cheers,
Tom