confused about option

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
RGSparber
Posts: 48
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none
Location: Phoenix, AZ
Contact:

confused about option

Post by RGSparber » Thu Aug 03, 2017 5:32 pm

I see below: - Touch Screen Operator Control panel. <--- Does this mean it comes with a Touch Screen monitor?

Thanks,

Rick
______________________________
Use your own PC OR purchase a Centroid NUC CNCPC $799 (#11084)

Centroid Intel NUC CNCPC

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software Mill and Lathe
- G code Editor
- Intercon Conversational
- Stock PLC programs
- Touch Screen Operator Control panel. <---
- Intel I3 processor, 4GB ram, SSD (solid state drive)
- Display port, HDMI, Ethernet, USB
- Centroid tested and pre qualified to work with Centroid CNC controllers

RGSparber
Posts: 48
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none
Location: Phoenix, AZ
Contact:

Re: confused about option

Post by RGSparber » Thu Aug 03, 2017 5:55 pm

Sorry, but my confusion continues. I found these two products. The one recommended for the Acorn is $799 which is the same price as just the NUC sold by Centroid. Is that right?

the other offering looks very similar but costs $401 more.

Thanks,

Rick

http://www.centroidcnc.com/centroid_diy ... nents.html

Centroid all-in-one Touch Screen CNCPC ready to go : $799 (#12786)

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software with G code Editor,
Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen
Operator Control panel.
- 19.5" Touch Screen,4 GB ram, I3 processor
- Wifi, Ethernet, webcam with mic, card reader, usb ports
- Powercord, Keyboard, Mouse
- Centroid tested and pre qualified to work with Centroid CNC controllers
- Compatible with Acorn, Oak, and Allin1DC

___________________________________________

http://www.centroidcnc.com/centroid_diy ... oller.html

Centroid all-in-one Touch Screen CNCPC ready to go $1200 (#11084tb)

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded "Centroid Free CNC" software with G code Editor, Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen Operator Control panel.

Plug in the Acorn board, run the Acorn Wizard and you are good to go.

Centroid_Liviu
Posts: 259
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: confused about option

Post by Centroid_Liviu » Fri Aug 04, 2017 7:54 am

- Touch Screen Operator Control panel. <--- Is the software option in CNC12 that allows a Touch Screen Control Panel to be used. You can touch your screen to jog, estop, etc. Just like a physical control pendant, but without the cost. A touch screen monitor is required for this.

Either the ALLIN1PC or the NUC PC will work if you want a computer option from us. We are currently updating the website and prices, some pages might show differences. Its the same item though.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest