I see below: - Touch Screen Operator Control panel. <--- Does this mean it comes with a Touch Screen monitor?
Thanks,
Rick
______________________________
Use your own PC OR purchase a Centroid NUC CNCPC $799 (#11084)
Centroid Intel NUC CNCPC
- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software Mill and Lathe
- G code Editor
- Intercon Conversational
- Stock PLC programs
- Touch Screen Operator Control panel. <---
- Intel I3 processor, 4GB ram, SSD (solid state drive)
- Display port, HDMI, Ethernet, USB
- Centroid tested and pre qualified to work with Centroid CNC controllers
confused about option
Moderator: cnckeith
-
- Posts: 150
- Joined: Sat May 27, 2017 2:12 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269533454-0111180523
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Phoenix, AZ
- Contact:
Re: confused about option
Sorry, but my confusion continues. I found these two products. The one recommended for the Acorn is $799 which is the same price as just the NUC sold by Centroid. Is that right?
the other offering looks very similar but costs $401 more.
Thanks,
Rick
http://www.centroidcnc.com/centroid_diy ... nents.html
Centroid all-in-one Touch Screen CNCPC ready to go : $799 (#12786)
- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software with G code Editor,
Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen
Operator Control panel.
- 19.5" Touch Screen,4 GB ram, I3 processor
- Wifi, Ethernet, webcam with mic, card reader, usb ports
- Powercord, Keyboard, Mouse
- Centroid tested and pre qualified to work with Centroid CNC controllers
- Compatible with Acorn, Oak, and Allin1DC
___________________________________________
http://www.centroidcnc.com/centroid_diy ... oller.html
Centroid all-in-one Touch Screen CNCPC ready to go $1200 (#11084tb)
- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded "Centroid Free CNC" software with G code Editor, Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen Operator Control panel.
Plug in the Acorn board, run the Acorn Wizard and you are good to go.
the other offering looks very similar but costs $401 more.
Thanks,
Rick
http://www.centroidcnc.com/centroid_diy ... nents.html
Centroid all-in-one Touch Screen CNCPC ready to go : $799 (#12786)
- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software with G code Editor,
Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen
Operator Control panel.
- 19.5" Touch Screen,4 GB ram, I3 processor
- Wifi, Ethernet, webcam with mic, card reader, usb ports
- Powercord, Keyboard, Mouse
- Centroid tested and pre qualified to work with Centroid CNC controllers
- Compatible with Acorn, Oak, and Allin1DC
___________________________________________
http://www.centroidcnc.com/centroid_diy ... oller.html
Centroid all-in-one Touch Screen CNCPC ready to go $1200 (#11084tb)
- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded "Centroid Free CNC" software with G code Editor, Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen Operator Control panel.
Plug in the Acorn board, run the Acorn Wizard and you are good to go.
-
- Posts: 430
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: confused about option
- Touch Screen Operator Control panel. <--- Is the software option in CNC12 that allows a Touch Screen Control Panel to be used. You can touch your screen to jog, estop, etc. Just like a physical control pendant, but without the cost. A touch screen monitor is required for this.
Either the ALLIN1PC or the NUC PC will work if you want a computer option from us. We are currently updating the website and prices, some pages might show differences. Its the same item though.
Either the ALLIN1PC or the NUC PC will work if you want a computer option from us. We are currently updating the website and prices, some pages might show differences. Its the same item though.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)