MPU11 not responding

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
dasme
Posts: 7
Joined: Sun Jul 15, 2012 2:39 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: A900283 ID 0807120528
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

MPU11 not responding

Post by dasme »

I have and All in one DC on a supermax 40 , on trying to start I get after timeout after initializing MPU then "MPU11 not responding ".
LED window on MPU has no numbers , just a horizontal line at the top ?
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: MPU11 not responding

Post by Centroid_Tech »

Please follow the attached tech bulletin to see if that helps resolve your issue.
Attachments
279 Error Initializing MPU11.pdf
(282.64 KiB) Downloaded 122 times
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
Post Reply