Upgrading CNC11 Software

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
polaraligned
Posts: 34
Joined: Mon Feb 07, 2011 8:03 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 1030090103

Upgrading CNC11 Software

Post by polaraligned » Sun Jul 30, 2017 9:03 pm

I currently am running version 632. The latest version on the website here is 734.
So is there an easy path to upgrade without having to redo all the settings, parameters, etc? In other words, if I run the setup for the new version does it transfer all the settings/parameters over to the new version?

Centroid_Liviu
Posts: 259
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Upgrading CNC11 Software

Post by Centroid_Liviu » Mon Jul 31, 2017 7:41 am

As long as you don't install a PLC program you will not overwrite your old settings. I suggest making a report beforehand either way, Press F7 Utilities, than F7 Report. Selected where you want to save the report. After you are done installing the updated software and are happy with your configuration, make another report and put it in a safe place. If something happens to your computer down the road you can just install the software on another PC, load the report, and be back up an running right away.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest