Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:
The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process
The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.
Thanks
Jay
Messages during ALLIN1DC Bench Test
Moderator: cnckeith
-
- Posts: 33
- Joined: Tue May 17, 2011 2:30 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900438
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Regina, Sask
Messages during ALLIN1DC Bench Test
Okotoks, Alberta
Re: Messages during ALLIN1DC Bench Test
Set Machine Parameter 900 = 1 to tell the software to expect your PLCADD1616 board.
The messages regarding tool and offset libraries will go away once you have gone to those screens and pressed F10/Save for the first time. Likewise, if you are getting a message about the WCS file, you can go to the Part Setup screen and set zero on any axis.
The messages regarding tool and offset libraries will go away once you have gone to those screens and pressed F10/Save for the first time. Likewise, if you are getting a message about the WCS file, you can go to the Part Setup screen and set zero on any axis.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Messages during ALLIN1DC Bench Test
Keep us posted on your progress! We're interested to see how you make out.Jay wrote: ↑Sun Jul 16, 2017 7:21 pm Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:
The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process
The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.
Thanks
Jay
What machine are you upgrading? Pictures?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 33
- Joined: Tue May 17, 2011 2:30 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900438
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Regina, Sask
Re: Messages during ALLIN1DC Bench Test
Awesome! thanks
I've taken pictures along the way as I've cleaned up this old Bridgeport, and will post them shortly.
Jay
Okotoks, Alberta
-
- Posts: 33
- Joined: Tue May 17, 2011 2:30 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900438
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Regina, Sask
Re: Messages during ALLIN1DC Bench Test
Hi Gang - I've posted pictures of the build in the Success stories section of this forum - so far enjoying the work!
Okotoks, Alberta