Messages during ALLIN1DC Bench Test

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: A900438
Location: Okotoks, Alberta

Messages during ALLIN1DC Bench Test

Post by Jay » Sun Jul 16, 2017 7:21 pm

Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:

The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process


The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.

Thanks
Jay
Okotoks, Alberta

cncsnw
Posts: 317
Joined: Wed Mar 24, 2010 5:48 pm

Re: Messages during ALLIN1DC Bench Test

Post by cncsnw » Sun Jul 16, 2017 11:30 pm

Set Machine Parameter 900 = 1 to tell the software to expect your PLCADD1616 board.

The messages regarding tool and offset libraries will go away once you have gone to those screens and pressed F10/Save for the first time. Likewise, if you are getting a message about the WCS file, you can go to the Part Setup screen and set zero on any axis.

martyscncgarage
Posts: 384
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Messages during ALLIN1DC Bench Test

Post by martyscncgarage » Mon Jul 17, 2017 11:31 am

Jay wrote:
Sun Jul 16, 2017 7:21 pm
Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:

The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process


The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.

Thanks
Jay
Keep us posted on your progress! We're interested to see how you make out.
What machine are you upgrading? Pictures?
Marty
"Jack of all trades, master of none!"
Mesa, AZ

Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: A900438
Location: Okotoks, Alberta

Re: Messages during ALLIN1DC Bench Test

Post by Jay » Mon Jul 17, 2017 7:44 pm

cncsnw wrote:
Sun Jul 16, 2017 11:30 pm
Set Machine Parameter 900 = 1 to tell the software to expect your PLCADD1616 board.
...
Awesome! thanks

I've taken pictures along the way as I've cleaned up this old Bridgeport, and will post them shortly.

Jay
Okotoks, Alberta

Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: A900438
Location: Okotoks, Alberta

Re: Messages during ALLIN1DC Bench Test

Post by Jay » Mon Sep 18, 2017 11:02 pm

Hi Gang - I've posted pictures of the build in the Success stories section of this forum - so far enjoying the work!
Okotoks, Alberta

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests