ALLIN1DC 160v to 180v conversion?

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
CRM
Posts: 89
Joined: Mon Jan 03, 2011 11:54 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: A900171
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

ALLIN1DC 160v to 180v conversion?

Post by CRM »

What difference is there between the early (160 volt max) ALLIN1 boards vs. the later (180 volt max) boards other than the 3 large capacitors close to the servo motor terminals?
Dean Jahnz
Cannon River Machine
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: ALLIN1DC 160v to 180v conversion?

Post by Centroid_Tech »

The higher voltage capacitors is the only difference. All of the other components on the ALLIN1DCs already could handle the higher voltages.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
Post Reply