Page 1 of 1

What are the dimensions/specs of the encoders Ajax sells?

Posted: Wed Mar 17, 2010 4:25 pm
by ajaxchris
Please see the attached drawings/specs. The shaft sizes available from AjaxCNC are 1/4", 6mm, 3/8", and 1/2" and can be ordered from our CNC Components page: http://www.ajaxcnc.com/cnc_components.htm

Some important amendments/corrections for the PDF spec sheet below:

1. These encoders are for use with DC motors and therefore have no commutation tracks. A DB9 connector will handle all 9 signals.
2. We sell only 4000 line(ppr) = 8000 count/rev in DC encoders.
3. We sell 1/4", 6mm, 3/8", and 1/2" shaft size encoders.