Today normally zeroing my mill at begining of work. After a little job, the Z axis does not zeroing; also after many-many tries to zeroing Z axis, the DRO continued shows 15.935 mm.The other axes zeroing.
What can happened? Any help?
Thanks in advance
Z axis doesn't zeroing
Moderator: cnckeith
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: Z axis doesn't zeroing
Are you stating that the Z axis doesn't move when homing the machine or that the value of the DRO doesn't show 0 after that axis has homed?
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
-
- Posts: 12
- Joined: Sat Jan 04, 2014 11:39 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: 0607050819
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Z axis doesn't zeroing
The DRO doesn't show 0 after Z axis has homed
-
- Posts: 12
- Joined: Sat Jan 04, 2014 11:39 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: 0607050819
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Z axis doesn't zeroing
I found the problem. The Z axis doesn't zeroing because I made part zero first
Now all are ok.
Thanks for correspondence
Now all are ok.
Thanks for correspondence