Mill Dual Arm tool changer
Moderator: cnckeith
-
- Posts: 66
- Joined: Wed Nov 16, 2011 5:50 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Mill Dual Arm tool changer
Do you have a sample plc program for a dual arm 24 station side mount type Mill tool changer?
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: Mill Dual Arm tool changer
We do not have a PLC program for a dual arm tool changer.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
Re: Mill Dual Arm tool changer
... unless he means a single arm with dual ends (the usual type).
-
- Posts: 66
- Joined: Wed Nov 16, 2011 5:50 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Mill Dual Arm tool changer
Yes single arm with tool holder at each end.
I've always heard them referred to as "dual arm".
It's on a 2003 fadal 4525.
I've always heard them referred to as "dual arm".
It's on a 2003 fadal 4525.
-
- Posts: 7322
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Mill Dual Arm tool changer
typically that is what we call a "swing arm" tool changer. and yep we have both schematics and plc programs for swing arm tool changers.
when the centroid cnc software is first installed on the CNCPC it ask the installer to choose a starter PLC program, in that list of many PLC programs you will find several swing arm atc plc pograms.
when the centroid cnc software is first installed on the CNCPC it ask the installer to choose a starter PLC program, in that list of many PLC programs you will find several swing arm atc plc pograms.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html