Bridgeport Boss Series I, 2005 retrofit to AjaxCNC, with DC310 PLC controller. Powered by Phase-a-matic Rotary 5hp.
I bought in 2007 used lightly for about a year. Stored.
For 2 yrs. I have been trying to bring this up. I just got the PLC DC310 back from Centroid after a going over and testing.
Today I finally homed the machine for the first time since 2007.
Next I hope to upgrade to 3hp Huan VFD. But for the moment, the spindle won't turn on.
I get no alarms. I can run programs. Existing programs. But I get no spindle rotation.
I have a Volt meter, but not sure what to check. 2hp 3phase original spindle motor.
Any leads are appreciated. Dana
No Spindle Motor- Bridgeport Series I -DC310 revival
Moderator: cnckeith
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: No Spindle Motor- Bridgeport Series I -DC310 revival
Please generate a current report and email it to support@centroidcnc.com. Thanks.
- Attachments
-
- 193 Generating Report.pdf
- (5.58 KiB) Downloaded 89 times
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
-
- Posts: 11
- Joined: Thu Jan 05, 2017 6:56 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A50115
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: No Spindle Motor- Bridgeport Series I -DC310 revival
Report emailed. Thank you! Dana