No Spindle Motor- Bridgeport Series I -DC310 revival

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
Tearsa
Posts: 11
Joined: Thu Jan 05, 2017 6:56 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: A50115

No Spindle Motor- Bridgeport Series I -DC310 revival

Post by Tearsa » Fri Feb 17, 2017 4:38 pm

Bridgeport Boss Series I, 2005 retrofit to AjaxCNC, with DC310 PLC controller. Powered by Phase-a-matic Rotary 5hp.
I bought in 2007 used lightly for about a year. Stored.
For 2 yrs. I have been trying to bring this up. I just got the PLC DC310 back from Centroid after a going over and testing.
Today I finally homed the machine for the first time since 2007.
Next I hope to upgrade to 3hp Huan VFD. But for the moment, the spindle won't turn on.
I get no alarms. I can run programs. Existing programs. But I get no spindle rotation.
I have a Volt meter, but not sure what to check. 2hp 3phase original spindle motor.
Any leads are appreciated. Dana

Centroid_Tech
Posts: 156
Joined: Thu Mar 18, 2010 2:24 pm

Re: No Spindle Motor- Bridgeport Series I -DC310 revival

Post by Centroid_Tech » Fri Feb 17, 2017 5:45 pm

Please generate a current report and email it to support@centroidcnc.com. Thanks.
Attachments
193 Generating Report.pdf
(5.58 KiB) Downloaded 20 times

Tearsa
Posts: 11
Joined: Thu Jan 05, 2017 6:56 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: A50115

Re: No Spindle Motor- Bridgeport Series I -DC310 revival

Post by Tearsa » Sat Feb 18, 2017 2:56 pm

Report emailed. Thank you! Dana

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest