Bostomatic G12


LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
Harry Whole
Posts: 1
Joined: Mon Feb 13, 2017 1:35 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Bostomatic G12

Post by Harry Whole » Mon Feb 13, 2017 1:43 pm

Hello!!! My name is Tom and I am with a small mold company in Gilbert AZ. We have a Bostomatic G12 that has good servos/ballscrews just the controller is not so good. I think we are having a heat issue as when we run for any length of time the machine will sometimes freeze up losing all offsets. I have been reading up on a controller retrofit and just wondering what would be involved to put an Ajax controller on this machine? Any help is much appreciated and thanks in advanced.....

Posts: 602
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Bostomatic G12

Post by cnckeith » Mon Feb 13, 2017 3:41 pm

Bostos are great machines.
lets start with what kind of axis motor is it currently equipped with?
can you post some photos of the machine, the electrical cabinet and close ups of the axis motors, and the data plates?
and i can advise you.

Post Reply

Who is online

Users browsing this forum: cncsnw, rl49 and 1 guest