Sd3 Logic Power Issue

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

cncsnw
Posts: 354
Joined: Wed Mar 24, 2010 5:48 pm

Re: Sd3 Logic Power Issue

Post by cncsnw » Tue Mar 07, 2017 4:42 pm

Regarding the pinched wire: this is why I recommend either sliding the jacket up, or using heat shrink, so that the individual conductors are contained and protected all the way through the "bottleneck" between the screw posts which join the shell halves together.
P3070003.JPG
Heat shrink to protect conductors in DE9 shell

Sportbikeryder
Posts: 23
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: TBD when back at shop
Location: North Carolina

Re: Sd3 Logic Power Issue

Post by Sportbikeryder » Tue Mar 14, 2017 5:46 pm

Certainly a good idea CNCSNW. This was not an in house build rather a complete system purchase. Worked mostly trouble free for 8 yrs. Just one of those head scratchers.

I am now doing general part machining rather than just head porting on the machine and may be upgrading / updating a few things in the future.

Post Reply

Who is online

Users browsing this forum: Gary Campbell and 2 guests