Sd3 Logic Power Issue
Moderator: cnckeith
Re: Sd3 Logic Power Issue
Regarding the pinched wire: this is why I recommend either sliding the jacket up, or using heat shrink, so that the individual conductors are contained and protected all the way through the "bottleneck" between the screw posts which join the shell halves together.
-
- Posts: 177
- Joined: Thu Jan 26, 2017 11:45 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 10583
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: Yes
- Location: North Carolina
Re: Sd3 Logic Power Issue
Certainly a good idea CNCSNW. This was not an in house build rather a complete system purchase. Worked mostly trouble free for 8 yrs. Just one of those head scratchers.
I am now doing general part machining rather than just head porting on the machine and may be upgrading / updating a few things in the future.
I am now doing general part machining rather than just head porting on the machine and may be upgrading / updating a few things in the future.