Here are complete system schematics for DC systems and 3rd party drive systems. Please use the install manual to write your DC3IOB system as it breaks everything down into individual sections. Which can be found here: http://ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=76
MPU11/DC3IOB DC system schematic:
MPU11/GPIO4D 3rd party drive system schematic: (under construction)
**RESOLVED** Schematics for MPU11/DC3IOB & MPU11/GPIO4D
Moderator: cnckeith
-
Centroid_Tech
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
**RESOLVED** Schematics for MPU11/DC3IOB & MPU11/GPIO4D
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
-
CNCguy
- Posts: 28
- Joined: Tue Mar 23, 2010 8:54 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Pennsylvania
Re: Schematics for MPU11/DC3IOB & MPU11/GPIO4D systems
Those links refer only to the DC3IOB Centroid/Ajax dc drives, and do not cover 3rd party drives.
Where is the GPIO4D documentation? Try this:
On the Ajaxcnc site
Tech Support
1. Online Manuals and Documentation CLICK HERE
Enter Mach3 Based Support
CLICK HERE
Complete system hook up Schematics in PDF
Using our DC drive (DC3IO)
Using 3rd party drives
Then you should see a hookup schematic for using a GPIO4D with 3rd party (non Centroid/Ajax ) drives
Where is the GPIO4D documentation? Try this:
On the Ajaxcnc site
Tech Support
1. Online Manuals and Documentation CLICK HERE
Enter Mach3 Based Support
CLICK HERE
Complete system hook up Schematics in PDF
Using our DC drive (DC3IO)
Using 3rd party drives
Then you should see a hookup schematic for using a GPIO4D with 3rd party (non Centroid/Ajax ) drives