got a probe from me bday

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
kenr305
Posts: 2
Joined: Fri Oct 07, 2016 2:04 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: 0917130853
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

got a probe from me bday

Post by kenr305 »

Is there a brain for the probe? Also do you have a diagram for the pin out for probe connection.\

Thanks
kenr305
Posts: 2
Joined: Fri Oct 07, 2016 2:04 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: 0917130853
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: got a probe from me bday

Post by kenr305 »

Ok after doing the research I should have done before asking a question I now have the pin connections.
My question is that on your diagram you say that the probe pin 3 (white) corresponds with input 772. Is that the same on Mach3 as the pin number when I set up the probe in Mach 3?
Post Reply