What type of fiber optic cable for board connection
Moderator: cnckeith
-
- Posts: 8
- Joined: Fri Apr 01, 2016 1:07 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
What type of fiber optic cable for board connection
What type of fiber optic cable/end is used to connect the MPU11 to the GPOI4D board? I bought a used kit from a local dealer and the fiber optic cables were not included. Thanks for the help!
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: What type of fiber optic cable for board connection
The manufacturer's part number of the fiber optic cable that Centroid is currently using is HPO - HFBR-RUD500Z and the connector is HPO - HFBR-4511Z in case you wish to build your own cable. If you would like, you can contact either Ajax or Centroid and order a 5' section of that fiber optic cable for $25.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..