Siemens ac servo motors

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
converterking
Posts: 129
Joined: Fri Mar 19, 2010 2:38 pm

Siemens ac servo motors

Post by converterking »

Will Centroid servo amps work with Siemens 2.5 and 3.5 kw ac servo motors?
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Siemens ac servo motors

Post by Centroid_Liviu »

Do you have the model numbers and the specifications on them? Our ACDC drives can handle up to 4kW motors but we may need to test them and determine PID parameters if its a servomotor we have not encountered before. Do you still have the original drives? Its possible we could command those. The Oak board is capable of commanding 3rd party drives in both velocity (-10 to +10V) and position mode.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply