oak board

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
larryl
Posts: 5
Joined: Tue May 03, 2016 12:18 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: a900508
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

oak board

Post by larryl »

at what point does relay 1 close (e stop) . on start up of cnc ?
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: oak board

Post by Centroid_Tech »

As soon as the CNC11 software is loaded and as long as the CNC11 software is not in a fault state, output 1 which is the NoFaultOut output will turn on.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
larryl
Posts: 5
Joined: Tue May 03, 2016 12:18 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: a900508
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: oak board

Post by larryl »

thank you
Post Reply