oak board
Moderator: cnckeith
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: oak board
As soon as the CNC11 software is loaded and as long as the CNC11 software is not in a fault state, output 1 which is the NoFaultOut output will turn on.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
-
- Posts: 5
- Joined: Tue May 03, 2016 12:18 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: a900508
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: oak board
thank you