I am installing an all-in-one control on a Hurco MD1 with a 12 position tool changer. I'm installing a new AC drive and am using a Delta C 2000. Seeing that the Delta VE is no longer available. I was hoping that you could supply us with an updated schematic as well as a new technical document outlining the recommended drive settings.
Thanks,
dan
New schematic for Delta drives
Moderator: cnckeith
-
- Posts: 20
- Joined: Sun Apr 03, 2016 2:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900460
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Vermont
-
- Posts: 7164
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: New schematic for Delta drives
dan, hello. i'll check and see if we have done the delta c 2000. in the meantime you can use the generic allin1dc to VFD schematic as a guide. using the Delta manual, its pretty easy to cross reference the connector label functions and make the proper connections to the allin1dc.
this link contains a zip file with several useful Allin1dc schematics in PDF format.. download it and unzip it to a folder and then take a look at the one named ALLIN1DC SPINDLE INVERTER.pdf
http://www.centroidcnc.com/downloads/al ... matics.zip
this link contains a zip file with several useful Allin1dc schematics in PDF format.. download it and unzip it to a folder and then take a look at the one named ALLIN1DC SPINDLE INVERTER.pdf
http://www.centroidcnc.com/downloads/al ... matics.zip
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 20
- Joined: Sun Apr 03, 2016 2:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900460
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Vermont
Re: New schematic for Delta drives
Thanks Keith,
Yes, that is the drawing that I'm using currently. I thought you would like to update your official schematic seeing that that other drive is no longer available.
What I was most interested in getting from you guys was a recommendations on the drive parameter setting.
Thanks for the quick response.
dan
Yes, that is the drawing that I'm using currently. I thought you would like to update your official schematic seeing that that other drive is no longer available.
What I was most interested in getting from you guys was a recommendations on the drive parameter setting.
Thanks for the quick response.
dan
-
- Posts: 20
- Joined: Sun Apr 03, 2016 2:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900460
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Vermont
Re: New schematic for Delta drives
Good morning,
Would it be possible to get a copy of your schematic drawings in AutoCAD format so that they can be edited? I can take just about any format.
dan
Would it be possible to get a copy of your schematic drawings in AutoCAD format so that they can be edited? I can take just about any format.
dan