changing cnc software

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
giuma madi
Posts: 1
Joined: Mon Mar 14, 2016 4:21 am
Allin1DC CNC Controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

changing cnc software

Post by giuma madi »

We have a DECKLE MAHO DMU 80P cnc milling software millplus-IT and after seeing what CNC11 and Mach3 software can do is it possiable to buy and install one of these softwares instead of its original software because it will help us alot?
Thank you
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: changing cnc software

Post by Centroid_Liviu »

A retrofit of your machine should be possible with our control. I would need to know a bit more on the motors and drives it currently has to give you a recommendation on the best option. The CNC11 software works hand in hand with our motion control.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply