We have a DECKLE MAHO DMU 80P cnc milling software millplus-IT and after seeing what CNC11 and Mach3 software can do is it possiable to buy and install one of these softwares instead of its original software because it will help us alot?
Thank you
changing cnc software
Moderator: cnckeith
-
- Posts: 1
- Joined: Mon Mar 14, 2016 4:21 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 430
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: changing cnc software
A retrofit of your machine should be possible with our control. I would need to know a bit more on the motors and drives it currently has to give you a recommendation on the best option. The CNC11 software works hand in hand with our motion control.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)