**RESOLVED** centroid cnc11
Moderator: cnckeith
**RESOLVED** centroid cnc11
hi looking for the web and not found the centroid program, is available, that price? =
-
CNCguy
- Posts: 28
- Joined: Tue Mar 23, 2010 8:54 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Pennsylvania
Re: centroid cnc11
Could you please clarify your question 
Re: centroid cnc11
if the numerical control program cnc11 you sell it separately to work with the mpu11, the program is in Spanish? that money has i =?
-
Centroid_Tech
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: centroid cnc11
Chimeno,
The CNC11 software comes on the CD you received with your control. If you want to purchase the software to run it instead of the Mach3 software you need to contact Ajax Sales 814-360-0279 to order it.
The cost is $500.
There is a parameter in the parameter screen of the CNC11 software that allows you to change the displayed language. The parameter is number 9, the options are English (default), Spanish, French, Traditional Chinese, and Simplified Chinese.
The CNC11 software comes on the CD you received with your control. If you want to purchase the software to run it instead of the Mach3 software you need to contact Ajax Sales 814-360-0279 to order it.
The cost is $500.
There is a parameter in the parameter screen of the CNC11 software that allows you to change the displayed language. The parameter is number 9, the options are English (default), Spanish, French, Traditional Chinese, and Simplified Chinese.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..