Ajax Mach3 question
Moderator: cnckeith
-
- Posts: 6
- Joined: Tue Feb 09, 2016 7:32 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Ajax Mach3 question
Hi everyone I bought a Ajax Allin1DC motion controller MPU11 1106120591 3.08 key A . I plan to use this on a milling machine that I am retrofitting. Since I don't have internet at my shop I removed a motor and put everything on a table for bench testing. It came with Mach 3 software also. My question is do I need to buy a unlock code for the Ajax system and get it configured and set up before I will be able to run the Mach 3. Or do I buy the Mach 3 license and set it up. Thanks
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Ajax Mach3 question
The install and setup manual will use the CNC11 software to set up the control. A 45 Demo would have come with your order that you can use for the setup. Based on the control serial number, a license for the Centroid software has not been purchased.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 7166
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Ajax Mach3 question
hello. you do not need to buy the ajax/centroid license to setup the cnc controller for use with mach3.
you do use the centroid software to setup all the hardware as outlined in the manual. as it is easier to use the centroid software to setup the hardware.
all systems ship with a "demo code" unlock that allows the centroid software to run for 45 days (days that you use it) this gives you plenty of time to use the centroid software to setup the control and to use it.. you may like it better than mach3.
you do use the centroid software to setup all the hardware as outlined in the manual. as it is easier to use the centroid software to setup the hardware.
all systems ship with a "demo code" unlock that allows the centroid software to run for 45 days (days that you use it) this gives you plenty of time to use the centroid software to setup the control and to use it.. you may like it better than mach3.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 6
- Joined: Tue Feb 09, 2016 7:32 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Ajax Mach3 question
Thank you for your quick replies, very helpful. I will look into getting a 45 demo.
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Ajax Mach3 question
A sheet with the 45 Day Demo and instructions on entering it should have shipped with your system. If you can't find it just send me an email at sales@ajaxcnc.com or give me a call at 814-353-9218 and I can get you another code.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)