Direct controlled Pump (Lube Oil Pump For Bridgeport)

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
rderkis
Posts: 25
Joined: Sun Apr 21, 2013 10:36 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: A900325
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Direct controlled Pump (Lube Oil Pump For Bridgeport)

Post by rderkis »

Docs say these are the best lube pumps to use but I cant find any reference to them on google. I must be using wrong search words. Who makes these and how are they listed? Does bijur make them?
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: Direct controlled Pump (Lube Oil Pump For Bridgeport)

Post by Centroid_Tech »

It is not a particular type of lube pump. Direct controlled just means that the machine's control actually activates the lube pump. Automatic lubrication systems will have a control built into the system that regulates when and for how long to lubricate a system. I am assuming that you are referring to parameter 179 of the Centroid software. The attached tech bulletin should help you.
Attachments
215.pdf
(78.7 KiB) Downloaded 501 times
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Direct controlled Pump (Lube Oil Pump For Bridgeport)

Post by cnckeith »

lots of lube pumps on ebay.
elrod sells a good one as well.
http://elrodmachine.com/CNC%20Auto%20Lube%20Pump.htm
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply