FIBER 3 COMMUNICATION ERROR

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
vasanthlathes
Posts: 4
Joined: Fri May 01, 2015 5:24 am
Allin1DC CNC Controller: No
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

FIBER 3 COMMUNICATION ERROR

Post by vasanthlathes »

Hello any one out there with this error, I posted this but no one responded. However I was right on my guess. O the MPU11 Board, the signals are sent and received by fiber optic cables. In my MPU11, the signal receiving socket which house a tiny optical device was faulty. I removed this Blue color unit by cutting off a small lock pad, removed a similar unit from an old DC310 Board ( different in shape, but connections are compatible) and soldered this to the MPU11. Now it does not give the error message and the machine is now working. If any one get this error like fiber 3 communication error, you should send the board to Ajaxcnc . Dont try what I did, unless you know how to safely remove these items without damaging delicate copper circuit tracks on the board. My post is only to educate users.
Post Reply