Carousel spins non-stop
Moderator: cnckeith
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Carousel spins non-stop
I accidently typed in t100m6 and now the tool carousel won't stop. The control is an m400 with cnc7 software, but I am unsure of the PLC.
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Carousel spins non-stop
I read the post that suggests creating a report and posting it here, but the report came out garbled. Any help would be appreciated before we have to have a technician come out for what is probably a 15min. fix.
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Carousel spins non-stop
I'm hoping someone out there can provide some information for me. I've been told this mill is a hobby machine and I cannot get any support for it.
Re: Carousel spins non-stop
Please post a photo of your electrical cabinet so we can see the hardware you have.
Does the carousel stop when estop is pressed?
Does the carousel stop when estop is pressed?
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: Carousel spins non-stop
The carousel stops when e-stop is pressed and doesn't start spinning again until a tool change is attempted. Regardless of the tool number, the casousel will spin non-stop until reset, but will not tool change. I will get a picture of the cabinet and inside the control soon.
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
-
- Posts: 12
- Joined: Thu Aug 06, 2015 2:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes