error in configuring mach3-mpu11. "vector starvation". mach screen initialy acknowledges communication with mpu11. mach indicates enabled status for x,y,z axes.
comments appreciated
j holland
**RESOLVED** vector starvation
Moderator: cnckeith
Re: vector starvation
Hello Jackson,
As I mentioned in my email, the most likely cause of "vector starvation" messages is a tripped limit switch. When Mach sees that a limit has tripped, it will stop sending vectors to the MPU11 causing the "vector starvation messages.
Please see the installation manual here for limit switch wiring information:
http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=76
As I mentioned in my email, the most likely cause of "vector starvation" messages is a tripped limit switch. When Mach sees that a limit has tripped, it will stop sending vectors to the MPU11 causing the "vector starvation messages.
Please see the installation manual here for limit switch wiring information:
http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=76