Hi all,
I had an older laptop I setup for the DCAIO Mill Retro. The 3.12 app was unlocked and has had all system tests run thru it. Been running jobs just fine. My kid brought over the new Alienware box and we installed the CD, ran a 'recover' from the saved files of the other system, Ran the unlock and rebooted. But it's not acting right and notes that system test has not been run. Is there a tech bulletin on moving your Mill setups and configs from one PC to another w/o redoing a lot of tasks?
thanks all,
Jeff.
How to setup a new Laptop w/ 3.12 restore?
Moderator: cnckeith
-
- Posts: 86
- Joined: Sat Dec 27, 2014 4:53 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: How to setup a new Laptop w/ 3.12 restore?
If you already have the software installed you can copy the directory (cncm) from the old PC to the new one. When it asks you about overwriting files select "Yes to all".
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)