Would this dc servo motor work with an allin1 control?
SEM MT40W4-90
C.STALL TORQUE 75LB/IN 10.5 A
MAX 2000 RPM 180 V 65 A
SEM servo motor with allin1
Moderator: cnckeith
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: SEM servo motor with allin1
It would most likely run reasonably well with the ALLIN1DC. However we recommend using an AC/DC for maximum performance.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Re: SEM servo motor with allin1
What do you mean by reasonably well?
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: SEM servo motor with allin1
The peak torque you could achieve would be less than what it would be with using the AC/DC.
ALLIN1DC: 75 in/lb continuous, 127.5 in/lb peak
AC/DC-30: 75 in/lb continuous, 150 in/lb peak at recommended setting (peak current = 2 times continuous)
ALLIN1DC: 75 in/lb continuous, 127.5 in/lb peak
AC/DC-30: 75 in/lb continuous, 150 in/lb peak at recommended setting (peak current = 2 times continuous)
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)