Page 1 of 1

Centroid CNC11 & CNC10 Operator Manuals

Posted: Fri May 21, 2010 2:20 pm
by diycncscott
MPU11/CNC11 Centroid Operators Manuals:

CNC11 v3.16 Mill Operators Manual
CNC11 v3.16 Lathe Operators Manual

CNC11 Windows 10 Setup Video:
https://youtu.be/Akmw8ak_TlM

CNC11 PLC Programming Manual:
http://www.centroidcnc.com/dealersuppor ... Manual.pdf

Centroid CNC11 Install Manuals - MPU11 systems

Posted: Wed Jun 02, 2010 10:03 am
by diycncscott
ALLIN1DC
centroid CNC11 ALLIN1DC Install Manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

Oak:
centroid Oak Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

MPU11/GPIO4D:
centroid MPU11/GPIO4D Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/MP ... Manual.pdf

DC3IOB:
centroid MPU11/DC3IOB Centroid CNC11 Installation Manual
http://www.ajaxcnc.com/tech/downloads/m ... nstall.pdf

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Thu Apr 17, 2014 4:42 pm
by bloomingtonmike
Centroid Rotary Table - RT-150

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Thu Oct 06, 2016 8:54 pm
by cnckeith
fyi.. all the latest Oak and ALlin1DC system schematic sets, installation and operator manuals are here.
http://www.centroidcnc.com/operator_manual.html

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Wed Jan 25, 2017 12:36 pm
by tblough
Is there an OAK velocity mode install manual like the one for the MPU11/GPIO4D?

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Mon Feb 13, 2017 3:48 pm
by cnckeith
yes..found on this page..http://www.centroidcnc.com/operator_manual.html
check out the oak schematics as well on same page

Re: Centroid CNC11 & CNC10 Operator Manuals

Posted: Wed Jan 10, 2018 3:48 pm
by tblough
I keep most of my manuals on a tablet for reference and it's a lot easier to navigate if they have TOCs and hyperlinks. So, I went through the CNC11 lathe manual and added those. [strike]Still working on the Mill manual (although I have an older 3.14 version with links if anyone is interested.)[/strike]
{EDIT} TOC and Links added to 3.16 Mill manual attached