Page 1 of 3

Centroid CNC12, CNC11 & CNC10 Manuals

Posted: Fri May 21, 2010 2:20 pm
by diycncscott
updated by cnckeith 6-17-19

CNC12 Operators Manuals

CNC12 Centroid Operators Manuals

https://www.centroidcnc.com/centroid_di ... nuals.html

newbie Centroid PLC programming video series..
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ

How to add a simple safety switch input to a PLC program
https://www.centroidcnc.com/dealersuppo ... ds/314.pdf

CNC12 PLC programming manual http://www.centroidcnc.com/centroid_diy ... manual.pdf

PLC Detective users guide.
https://www.centroidcnc.com/downloads/c ... kstart.pdf


MPU11/CNC11 Centroid Operators Manuals:

CNC11 v3.16 Mill Operators Manual
CNC11 v3.16 Lathe Operators Manual

CNC11 Windows 10 Setup Video:
https://youtu.be/Akmw8ak_TlM

CNC11 PLC Programming Manual:
http://www.centroidcnc.com/dealersuppor ... Manual.pdf

Centroid CNC11 Install Manuals - MPU11 systems

Posted: Wed Jun 02, 2010 10:03 am
by diycncscott
ALLIN1DC
centroid CNC11 ALLIN1DC Install Manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

Oak:
centroid Oak Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf

MPU11/GPIO4D:
centroid MPU11/GPIO4D Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/MP ... Manual.pdf

DC3IOB:
centroid MPU11/DC3IOB Centroid CNC11 Installation Manual
http://www.ajaxcnc.com/tech/downloads/m ... nstall.pdf

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Thu Apr 17, 2014 4:42 pm
by bloomingtonmike
Centroid Rotary Table - RT-150

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Thu Oct 06, 2016 8:54 pm
by cnckeith
fyi.. all the latest Oak and ALlin1DC system schematic sets, installation and operator manuals are here.
http://www.centroidcnc.com/operator_manual.html

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Wed Jan 25, 2017 12:36 pm
by tblough
Is there an OAK velocity mode install manual like the one for the MPU11/GPIO4D?

Re: Circuit Board Manuals, Install Manuals, Operator Manuals

Posted: Mon Feb 13, 2017 3:48 pm
by cnckeith
yes..found on this page..http://www.centroidcnc.com/operator_manual.html
check out the oak schematics as well on same page

Re: Centroid CNC11 & CNC10 Operator Manuals

Posted: Wed Jan 10, 2018 3:48 pm
by tblough
I keep most of my manuals on a tablet for reference and it's a lot easier to navigate if they have TOCs and hyperlinks. So, I went through the CNC11 lathe manual and added those. [strike]Still working on the Mill manual (although I have an older 3.14 version with links if anyone is interested.)[/strike]
{EDIT} TOC and Links added to 3.16 Mill manual attached

Re: Centroid CNC11 & CNC10 Operator Manuals

Posted: Mon Mar 12, 2018 5:49 pm
by cncsnw
Tom,

Thank you for the effort on this. The manual files are much nicer that way.

What software tool did you use to add the TOC and links?

Re: Centroid CNC11 & CNC10 Operator Manuals

Posted: Wed Mar 14, 2018 4:40 pm
by tblough
Marc,

I used AutoBookmark from Evermap.

https://www.evermap.com/autobookmark.asp

It makes it easier, but still a lot of work.

Re: Centroid CNC11 & CNC10 Operator Manuals

Posted: Thu Apr 05, 2018 1:58 am
by Fredsan
Just saw this topic, and downloaded the milling manual with bookmarks.

Maybe you should post this also in the Acorn section, I expect many more Acorn users appreciate the bookmarks.

This makes searching the manual so much easier :D