vfd drive
Moderator: cnckeith
-
- Posts: 5
- Joined: Tue May 20, 2014 10:41 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
vfd drive
I AM JUST STARTING A RETROFIT OF MY r2e4 BRIDGEPORT I have a 15 hp rotary phase converter running the rest of my shop (manual lathe Kearny trecker mill and what not) would it be advantages to install a vfd drive to run my machine and if so would it be better with a 240 single phase or a 3 phase input
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: vfd drive
Installing a VFD will also give you exact RPM speed control. Based on the model BP you have, the hp of your spindle motor is around 2-3hp?
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: vfd drive
Have you measured the voltage on each leg of your RPC? Is it balanced? If not and with only 2-3hp need probably I would not risk using the wild leg on the VFD input as there is no real benefit. In fact it will cost you more per kw as the ideler is running during usage of the RPC.
Mikie in Bloomington IL
-
- Posts: 91
- Joined: Thu Oct 17, 2013 4:32 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: 0605130770
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: vfd drive
We converted our R2E4 to single-phase with ease (even BEFORE we bought the Centroid control, when we were still running on the BOSS-9 control). No need to keep that roaring converter going!
LLoyd
LLoyd